If a similar query has brought you here – then this would probably be the last guide that you will read. A lot of times, after connecting a new hard drive to a Windows system, users are not able to access it. From a physical fault to a software issue, there could be all kinds of reasons behind it. To help you fix the new hard drive not showing up issue, we have come up with this detailed guide. It has included almost every possible solution that would let you access your new hard drive on your Windows system without any hassle.
As you know, there could be all kinds of reasons for a new HDD not showing up on Windows. Before we discuss its solutions, it is important to know some of the major reasons that could have caused this problem.
Since there could be several reasons for a new hard drive not showing on Windows, it is better to take a stepwise approach. For your convenience, we have started with the easiest solutions and gradually moved to more complex fixes.
First things first – before you take any drastic measure, make sure that there is no physical damage to your hard disk, the connecting cable, or the USB port on your system. Try to connect your hard disk to any other computer and check if the output is same or not. Also, use an authentic USB cable to connect your HDD. Chances are that the USB port on your system could be damaged or have debris in it. You can clean it with a dry cotton bud and try reconnecting your HDD to it.
If you haven’t updated your Windows firmware or drivers in a while, then your new HDD might not show up. The best way to fix this issue is by updating the drivers. If the updating won’t work, then you can even uninstall the drivers and reinstall them afterward.
1. Firstly, go to the Start menu, look for “Device Manager” and launch it. You can also press the Windows + X + M keys at the same time or access it from the Control Panel as well.
2. Once the Device Manager window will be launched, go to the USB controllers and expand it by clicking on the “+” icon adjacent to it.
3. Select the USB driver from here and right-click it. From here, you can choose to update the driver. This will launch a wizard to update the driver without any trouble.
4. Subsequently, you can also disable the device and enable it again. If you want, you can even uninstall the drivers and reinstall it afterward.
It has been observed that if the hard drive is brand new and has never been connected to a system before, then we are needed to initialize it first. The good thing is that it lets us format the hard drive in the file system or partition format of our choice. Here’s how you can fix the new HDD not showing up issue on Windows.
1. In order to initialize the hard drive, you need to access the Disk Management tool. You can go to the Start menu and launch it from here. Alternatively, open the Run prompt and enter the “diskmgmt.msc” command to launch it.
2. Once the Disk Management application is launched, you can view the unassigned connected drive at the bottom. Just make sure that the HDD is connected to the system beforehand. Select the disk space from here, right-click, and choose to initialize the disk.
3. This will launch a dedicated wizard that you can follow to initialize the disk. You can select the disk from here and allocate it a supported partitioning style.
4. When the process is completed, the disk would become unavailable, but it will still be unassigned. Again, right-click its space and select the “New Simple Volume” option.
5. Follow a simple click-through process to initialize the disk. Allocate it the needed space, label the volume, and assign it a file format (like NTFS or exFAT) to complete the setup.
There are times when the clash between the drive letters also doesn’t allow us to access a connected drive. For instance, if the connected hard drive already has a drive letter allocated and the same letter is pre-assigned to any other partition, then it can cause a clash. To fix this, you can simply assign a new letter to your hard drive. Here’s how you can fix a new hard drive not showing up issue by changing its drive letter.
1. Connect the hard drive to your system securely and launch the Disk Management application from the start menu.
2. From here, you can select and right-click the connected drive. Now, just select the “Change Drive Letter and Paths” option.
3. This will open a dedicated window, providing options to add, remove, or change the path. Click on the “Change” button from here.
4. Click on the dropdown menu for the “Assign the following drive letter” option. From here, you can select a new drive letter for the disk and click on the “Ok” button to implement it.
A USB root hub is a dedicated component in the Device Manager that lets us connect the system to multiple USB drives. It has been observed that when the USB root hub feature is disabled, users encounter the new hard drive not showing up issue in Windows 10. Thankfully, you can easily fix it in the following manner and later view the hidden drives.
1. To start with, launch Device Manager on your system from its Control Panel or the Start menu.
2. Expand the Universal Serial Bus Controllers feature and select the USB Root Hub option.
3. Right-click to see if it is enabled or disabled. If not, then enable it from here. Once it is enabled, you will get an option to disable it.
4. Now, go to the View option on the Device Manager toolbar and select the “Show hidden devices” option. If the connected HDD was hidden, then you can view it now.
You might already know that Windows store a dedicated registry about the working of several devices. If the new hard drive is not showing up on Windows 10 even after the above solutions, then you can consider making some changes in the registry. Though, you should be extremely careful as one wrong change can cause a lot of damage to your system.
1. Firstly, press the Windows + R keys to launch the Run prompt. Now, enter the “regedit” command and run it. This will launch the Registry Editor window on the system.
2. At the same time, go to the Device Manager window, select the USB drive, and go to its Properties. Under the Details tab, you can see a “Value” field. Simply right-click and copy the value data to the clipboard.
3. Now, go to the Registry Editor window and press Ctrl + F. Paste the copied value to look for it. Alternatively, you can browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\
4. Once you go to the Device Parameters folder, right-click and create a new D-word. Make sure that you name it as “EnhancedPowerManagementEnabled” with the value set as 0.
5. After saving it, you can find the new value created. Now, close the Registry Editor, reboot your computer, and reconnect your HDD.
If your computer has been infected by a malware or virus, then it can also cause the new hard drive not showing up. Alternatively, if the hard disk is also infected by a malware, then it might not be detected by the system. To do this, you can take the assistance of Windows Defender, which is an inbuilt anti-malware tool. Additionally, you can try any other third-party antivirus tool like Norton, Avast, Avira, McAfee, and so on.
Sometimes, while fixing the new hard drive not showing up issue, users end up losing the stored data on the disk. In this case, you can take the assistance of Recoverit Data Recovery. One of the best data recovery tools out there, it supports every kind of hard disk – from leading manufacturers and running on file systems like NTFS, exFAT, FAT, EXT, etc. Since it features a user-friendly interface, you can follow a simple click-through process and extract more than 1000 different types of files.
Firstly, connect your HDD to the system and launch Recoverit on it. On its home, you can view the available partitions and external sources. Simply select your HDD and click on the “Start” button.
Sit back and wait for a few minutes as Recoverit would scan the drive and get back your lost and deleted data from it.
In the end, all the extracted data will be displayed under different categories. From here, you can also preview your photos, videos, and documents as well. Select the files you wish to get back, click on the “Recover” button, and save them to any other location of your choice.
When it comes to protecting an HDD, it is better to be safe than sorry. Our hard drives can contain our vital information and we should take a few preventive measures to safeguard it. Here are some simple yet effective solutions that will help you protect your HDD and the stored data.
I’m sure that the guide would have helped you fix issues like new HDD not showing up in Windows. For your convenience, we have listed several solutions that can help you overcome this issue. Furthermore, you should follow the above-listed suggestions to protect your hard disk and its data. So what are you waiting for? Go ahead and try some of these fixes and share this guide with others to teach them how to fix a new hard drive not showing up in Windows 10.