Mac Repair Guide: 15 Common Mac Problems and Solutions

Fix all kinds of Mac problems by reading this complete and stepwise Mac repair guide. It has listed Mac solutions for the 15 most commonly faced issues by users.

Jul 19,2019 • Filed to: Solve Mac Problems • Proven solutions

0

If you own a Mac, then chances are that you might encounter some unwanted Mac problems as well. From minor issues like a slow system or Safari being unresponsive to drastic problems like Mac stuck in the boot loop or kernel panic – there can be all kinds of unwanted situations you might face. Don’t worry – we are here to help you with this extensive Mac repair guide, listing solutions for all kinds of commonly faced problems with Mac. Read on and start Mac troubleshooting like a pro as we are here to fix your Mac with these expert tips.

mac-still-working

Part 1. Accidentally Deleted Files or Lost Important Data

This is one of the most common Mac problems encountered by users these days. Too often, we end up losing our important files and data out of the blue. While this might seem like a complicated situation, you can take the assistance of a professional data recovery tool to get your lost files back.

Causes

Solution: Use Recoverit Data Recovery

One of the best Mac tips would be keeping a data recovery tool handy so that you can immediately retrieve your lost files. Now, with the assistance of Recoverit Data Recovery , you can easily do the same. It is one of the most advanced data recovery applications for Mac that supports 1000+ different file formats. Featuring a user-friendly interface, it boasts one of the highest recovery rates in the industry. If you have also lost your data, then install Recoverit (for free) and follow these steps:

Step 1: Select a Location

Once you launch Recoverit 8.0 on your Mac, you will be given an option to select a location. This can be a disk, a partition, or even a folder. You can browse to a specific location and even select an external device (like SD card or pen drive) as well.

select-scan-location

Step 2: Scan the Location

Just click on the “Start” button after selecting a location and wait for a few minutes. The data recovery application will perform the needed steps to get back your lost content.

scan-location

Step 3: Preview and Recover

When the extraction of the data is completed, you will be notified. The interface will already list the data under different categories for you to preview. Select the photos, videos, documents, or any other file of your choice. Click on the “Recover” button in the end and save your data to a trusted location.

recover-email


Part 2. MacOS Could Not Be Installed on the Computer

Another common Mac issue that users face is regarding the installation of the OS itself. If you are planning to simply update macOS, then you might not face a lot of Mac issues. Though, if you want to install more than one operating system on a single machine, then you need to follow some Mac solutions.

Causes

Solution 1: Reset PRAM/NVRAM

The Parameter RAM and Non Volatile RAM are responsible for the booting and other important components in a system. To do this Mac fix, restart your system and press the P + R + Option + Command keys. Keep holding them to reset the PRAM/NVRAM and restart Mac once it is done.

set-pram-mac

Solution 2: Use Startup Manager

Chances are that Mac could be selecting a faulty disk to boot. To fix this, restart your system and hold the Option/Alt key till you get the Startup Manager window. From here, you need to select the disk where the macOS installer is present.

startup-manager-mac


Part 3. Mac Running Slow

There could be all sorts of reasons for your Mac to be running slow. For instance, you could be using an old macOS version or the Mac storage might be stacked. Thankfully, you can easily do a Mac repair and boost its performance.

Causes

Solution 1: Clear your Mac storage

This is the best way to do Mac fix for a slow system. Start by getting rid of all the unwanted data and junk from your system. For instance, you can go to the Downloads, Movies, or Pictures folder and remove the files you no longer need. Apart from that, also visit the Library folder and delete log, temp, and cache files.

clear-cache-mac

Solution 2: Update macOS

In case if you are running an old version of OS on your Mac, then you should consider updating it. Just go to the Apple menu on Finder and click on “Software Update”. You can also access the Software Update feature from the Applications folder as well. Simply follow the on-screen instructions to update macOS to a stable version.

software-update-macos


Part 4. Mac Won’t Turn On

This is one of the more complicated Mac problems that users face. Since there could be a hardware or a software related issue for this, you need to identify its cause beforehand.

Causes

Solution 1: Check power and battery source

Before you take any drastic measure, make sure that your system is connected to a stable power source. Check the plug and the cord as it should not be damaged. Also, you can drain the battery and charge to 100% in order to reset its cycle.

power-cord-mac

Solution 2: Reset SMC on Mac

System Management Controller is a special chip in Mac used to control peripheral devices and do power management. If you have a MacBook, then restart it and press Shift + Control + Option buttons. After a few seconds, press the Power button and keep holding all the 4 buttons for another 10 seconds. In the end, let go of them and turn on your Mac.

reset-smc-mac

For a desktop, you need to unplug the power input for 15 seconds and connect it back. After waiting for 5 seconds, restart the system to reset its SMC.


Part 5. Mac Black Screen

Getting a black screen of death on Mac is probably one of the most adverse Mac problems to face. In this case, you won’t be able to turn on your system or log-in to your account. While it might seem complicated, you can follow some Mac tips to fix this.

Causes

Solution 1: Sleep and Restart

Firstly, turn on the system by pressing the power button. Even if you can’t see anything, hold the S and the Power buttons for another 10 seconds to make the system sleep. In some systems, the shortcut is Control + Eject instead. Let go of the keys when you hear the sound of Mac turning off. Wait for 15 seconds and press the Power button again.

sleep-restart-mac

Solution 2: Boot Mac in Safe Mode

If there are software related Mac issues causing this problem, then you can try to boot it in the safe mode. Restart or turn on the system and hold the Shift key. This will boot the system in a safe mode automatically. Later, you can visit the system settings and fix this.

mac-safe-mode


Part 6. MacBook Stuck on Apple Logo

While booting, it might happen that your Mac’s screen has been stuck on the Apple logo. This means that your system’s present booting cycle has been tampered with and you need to do a Mac fix right away.

Causes

Solution 1: Forcefully restart it

This is one of the easiest Mac solutions to fix different kinds of issues related to it. When we forcefully restart it, the present power cycle of the system resets and often fixes a problem. All you need to do is press and hold the Power button for a while until you hear your Mac shutting down. Once it is switched off, wait for a while, and press the Power button again.

power-button-mac

Solution 2: Perform Internet Recovery

When there is a serious issue with your Mac, then you can choose to get help online as well. To do this, you need to boot your Mac in the recovery mode first. Restart it and hold the Command + R keys (or Command + Option + R) while booting. As the macOS Utility window will open, click on “Get Help Online” and follow a simple click-through process.

get-help-online-mac


Part 7. Startup Disk Full on Mac

Startup Disk is one of the most important components in Mac as it stores the macOS system files and other firmware content. Therefore, you should make sure that the startup disk hasn’t accumulated too much space. If the disk has utilized more than 80% of the total space, then it can even slow down your system.

Causes

Solution 1: Delete unwanted files

The best way to make more space on the startup disk is by deleting anything you no longer need. Just launch Finder and delete photos, videos, documents, etc. from it. You can also visit Mac’s Library folder to move the temp, cache, and log files. In the end, just go to Trash and empty it to permanently get rid of the deleted content.

empty-trash-mac

Solution 2: Uninstall apps

If you have got a lot of apps installed on your Mac, then it can certainly slow it down. For this Mac troubleshooting, we will go to Finder > Applications first. Now, right-click the app you wish to delete and move it to trash.

uninstall-apps-mac

Solution 3: Wipe the entire disk/partition

If the disk does not have any important data stored, then you can simply format it. This will also help in disk defragmentation and let you reclaim the lost space on the drive. Just go to Applications > Disk Utility and select your disk. From the right, click on the “Erase” option and confirm your choice to format the disk.

format-disk-mac


Part 8. Mac Kernel Panic

Getting the Kernel Panic screen is one of the most serious Mac problems that you might encounter. It will tamper with the usual processing of the system and will not allow it to boot in the normal mode. The good thing is that you can easily perform Mac repair for this problem.

Causes

Solution 1: Check for hardware damage

Firstly, you need to make sure that all the peripheral devices are working properly. You can also check for any hardware damage and even open your Mac as well. This will let you see if RAM or any other chip has been damaged or not.

Solution 2: Check Kernel logs

In order to fix Macbook Kernel Panic issue, you need to check the Kernel logs. Firstly, boot your Mac in Safe Mode and then go to “/Library/Logs/DiagnosticReports” location via Finder. Here, you can view the stored Kernel logs. Open them and check for any faulty entry to deal with it. You can remove the application or process it is associated with.

kernel-logs-mac


Part 9. Safari Not Working on Mac

Safari is the default web browser in Mac and can help us access the net seamlessly. Though, it might seem to malfunction or lag at times. Thankfully, there are tons of working Mac solutions to fix it.

Causes

Solution 1: Relaunch Safari

This is the easiest Mac fix to resolve issues with a malfunctioning Safari app. Simply close it, wait for a while, and launch it again. If Safari is not responding, then you can force close the app too. Press the Option + Command + Esc keys to get the Force Quit Applications window. Select Safari and forcefully close it on your Mac.

relaunch-safari-mac

Solution 2: Remove faulty plugins

There are all kinds of extensions and plugins that we can use with Safari. Though, one faulty plugin can sometimes make the entire app malfunction. To perform this Mac repair, launch Safari, and go to its Preferences > Extensions. From here, you can just remove any unreliable plugin.

remove-plugins-safari

Solution 3: Clear website data

If you have been using Safari for a while, then it can accumulate a lot of website data and browsing history. This can slow down the overall processing of the app. To fix this, launch Safari and go to its Preferences > Privacy and choose to remove all website data.

clear-website-data


Part 10. Mac Sound Not Working

Apart from the visuals, sound is also an integral part of our overall system experience. Nevertheless, there are times when a software or hardware issue causes unwanted sound Mac problems.

Causes

Solution 1: Check ports and hardware

Needless to say, your earphones or speakers should be in a proper condition beforehand. You can also remove them and clean the ports as well. Try using your devices with another system to check their working.

Solution 2: Reset the Sound Controller

Most of the times, we are able to fix sound-related Mac issues by resetting the controller. To do this, go to Finder > Applications > Utility and launch Activity Monitor. Now, look for the “coreaudiod” process from the list and forcefully close it. Afterward, launch iTunes and try to access any music file on your Mac.

reset-sound-controller


Part 11. External Hard Drive Not Showing Up on Mac

We all use external hard disks and pen drives with our Mac for all kinds of things. Though, if the hard drive icon is not showing on your Mac, then you can’t access its storage or use it the way you like.

Causes

Solution 1: Check Finder Preferences

If you have connected the external drive and it is still not visible on Finder, then go to its Preferences. In the General tab, you can see what is visible on Finder. Enable the option for hard disks, external devices, and so on.

finder-preferences-settings

Solution 2: Repair the disk

There could be some problem with the external drive as well. Once you have connected the drive, go to Applications > Utility and launch Disk Utility. Select the external drive from the sidebar and click on the “First Aid” button on the right. This will let you repair the disk and fix minor issues related to it.

running-first-aid-mac


Part 12. Trackpad Not Working on Mac

If you have a MacBook, then you must be used to accessing its trackpad while using the system. Even a slightest inconvenience with Mac’s trackpad can tamper with your work and should be fixed immediately.

Causes

Solution 1: Check its Accessibility Settings

Simply go to Finder > System Preferences > Accessibility and click on the “Mouse and Trackpad” section. From here, you can check if all the accessibility settings are proper or not. You can further click on “Trackpad Options” to further diagnose this problem.

trackpad-settings-mac

Solution 2: Trackpad firmware update

If the trackpad’s firmware hasn’t been updated in a while, then it can also cause similar Mac problems. You can just go to the Software Update section under Applications and check for any update. If you want, you can also go to Mac’s App Store and do the same.

trackpad-software-update


Part 13. Mac Mouse Not Working

Instead of a trackpad, a lot of users prefer using a mouse with their MacBook instead. You might be using a mouse with your desktop as well. Though, if it isn’t working, then consider following some smart Mac tips to fix it.

Causes

Solution 1: Check for hardware damage

Firstly, you should make sure that your mouse is working properly. Try connecting it to any other device to check it. You can also clean the port and ensure there are no hardware related Mac issues. If you want, you can turn off the house and turn it back again to reset it.

Solution 2: Disable Trackpad

If you are using a mouse on your notebook, then it can clash with the inbuilt trackpad. In this case, go to System Settings > Accessibility > Mouse & Trackpad. From here, enable the option to ignore the trackpad when a dedicated mouse is connected to the system.

mouse-accessibility-mac


Part 14. Spinning Beach Ball

Ideally, the spinning pinball or beach ball is a mouse icon on Mac, which indicates that the system/application is busy. Though, sometimes users face Mac issues with it when the icon gets stuck and doesn’t seem to work.

Causes

Solution 1: Kill the relevant processes

One of the best Mac solutions for the spinning beach ball is killing all the unresponsive processes. To do this, just go to Finder > Applications > Utility and launch Activity Monitor. Now, forcefully close all the malfunctioning or heavy applications on your Mac that you think are stuck.

activity-monitor-mac

Solution 2: Reinstall macOS

If nothing else would seem to work, then you can just choose to reinstall the operating system as well. To do this, boot your Mac in the recovery mode by pressing the Command + R keys while restarting the system. When you get the macOS Utilities window on the screen, click on the “Reinstall macOS” button and follow the on-screen instructions to install the latest firmware update.

reinstall-macos-disk-utility


Part 15. Mac Wifi Not Working

In order to access the web, your Mac should be connected to a working WiFi network. If you are facing Mac problems related to its network, then you can run a thorough diagnostic to do a Mac fix.

Causes

Solution 1: Restart Mac

Sometimes, the simplest of the Mac solutions can help us fix all sorts of problems with it. You can just go to the Apple logo on the Finder and click on the “Restart” button to do it. Wait for a while and try to connect to a network once Mac is restarted.

finder-restart-mac

Solution 2: Reset the network

If there is an issue with a particular network, then you can simply reset it as well. Just go to System Preferences > Network and delete the network from the list. Afterward, click on the “Add” icon and enter the relevant details to add the same network again.

reset-network-mac

Solution 3: Run Network Diagnostics

Mac also provides us a seamless solution to check the network connection and other settings as well. All you need to do is visit Finder > System Preferences > Network and click on the “Assist Me” option. From here, you can run the Network Diagnostic and resolve any unwanted issue with system settings or network configurations.

network-diagnostics-mac


Conclusion

That’s a wrap, folks! After reading this detailed Mac repair guide, you must be able to fix all kinds of issues related to your Mac. In this complete Mac troubleshooting guide, we have covered all sorts of problems related to network, trackpad, screen of death, slow system, and so much more. Also, if you don’t want to suffer from an unexpected loss of data on your Mac, then use a data recovery tool like Recoverit. Developed by Wondershare, Recoverit 8.0 is a highly reliable and secure recovery application that will certainly help you during any unforeseen data loss scenario.

Sue Wen

staff Editor

0 Comment(s)
Home | Resources | Solve Mac Problems | Mac Repair Guide: 15 Common Mac Problems and Solutions