A sheer panic is bound to erupt whenever the blue screen appears on the computer, especially when you are in the middle of an important task. Such an issue usually points to the sudden failure of hardware or the computer’s lack of ability to support a specific program that you had recently installed. In whatever case, there are always convenient solutions to fix the issue, and we will discuss five of them in this article.
When you are in the middle of performing a task on the computer and suddenly feel the computer’s inability to respond to your tasks and seeing a blue screen instead of the conventional display, then it means that a blue dump error on your computer has occurred. It is also referred to as the blue screen of death or BSOD.
This issue occurs typically due to hardware failure or some other problem with the driver with the faulty hardware. Sometimes it due to a recently updated or installed program on the PC as well. These apps or programs are mostly third-party ones, as built-in apps do not cause the blue dump error. Fortunately, there are many ways to solve the problem quickly, which we will discuss the next section of the article.
Panic only causes further pain in times of crisis. It is wise to find a solution to the issue rather than dwelling on its occurrence. Here are the ways to fix the blue dump error if it ever occurs on your computer.
Step 1: Blue Dump Error – Check Recently Installed Hardware and Device Drivers:
If you had recently acquired new hardware or updated the driver of a version of the old hardware, then its incompatibility could result in the blue dump error to occur. It would help if you immediately restarted your computer and head on to the device manager to uninstall the driver. Now, install a third-party driver detecting app on your computer and reinstall the driver on your computer from there.
Step 2: Blue Dump Error – Repair Your Registry:
The registry of the Windows operating system is a database of information, settings, and other values for software and hardware that are used or installed on the computer. Sometimes they need an occasional tuning or repairing when an error like the blue dump appears out of nowhere. Here are the steps:
Step 3: Blue Dump Error – Check CMOS and Memory Modules:
The blue screen may also occur due to the lack of ventilation inside the computer caused by excess dust on the hardware such as the memory module and the CMOS(Complementary Metal Oxide Semiconductor).
All you have to do is remove the battery out of its compartment(if you’re using a laptop) or plug all the power source of the computer and open the area of the machine where all the hardware is located. Unplug and memory the memory module, and replug it—furthermore, clean everything around the CMOS with a wipe.
After all of that is done, connect the battery or power again, and start using the computer again.
Step 4: Blue Dump Error – Rectify a Damaged Hard Drive:
If the blue sump error occurs continuously, then it is time to check whether the hard drive of the computer is healthy or not. You can check the health of the hard drive by running a SMART scan on the system through the MS Command Prompt utility. Here are the steps:
Step 5: Blue Dump Error – Check for Virus:
The blue screen of death could appear due to the presence of an unwanted file or software on the computer. That file could potentially contain malware of any such virus with it, causing the computer to malfunction and showing a blue screen.
We recommend using reliable antivirus software that is capable of detecting the virus or remove the newly installed software from the system altogether.
Though none of the solutions mentioned above could cause data loss on your PC, if ever such catastrophe does occur with you, then you could always refer to Recoverit Data Recovery assistance. Recoverit retrieves your files with fantastic accuracy and is available on both macOS and Windows. Check out some of the other unique attributes of Recoverit in the list below:
Step 1. Select a Location:
Run the application on your Windows PC by double-clicking on its icon. Select any disk drive, an external device, or folder and click on Start for the scan to commence.
Step 2. Scan the Location:
The interface of Recoverit allows you to halt the scanning process anytime you like by simply clicking on the “Pause” or “Stop” button. However, the best course of action is to let the app complete the full recovery, which will only take a few minutes to finish. Recoverit will notify with a pop-up message after the scan.
Step 3. Preview and Recover Files:
Go through each file through the app’s preview section and select the files you wish to use again. Click on the “Recover” button after that to store the data to any location you like.
The blue dump error is one of the frequently occurring issues on the Windows PC, and anything from hardware failure to a corrupt software could result in its occurrence. It is wise to avoid installing third-party apps from unverified sources that could put a strain on your computer. Such type of system failure could inevitably result in something more disastrous, like data loss. However, where there is a will, there is away! That lost data could easily be retrieved with the Recoverit data recovery app.
How do I fix a blue screen error?
What causes a blue screen crash dump?
Is blue screen error dangerous?