Using Windows 10 on a Mac computer is easy than most people give it credit. Then again, it doesn’t mean that that it doesn’t come with particular problems of its own. Sometimes boot camping Windows 10 on the Mac computer could result in audio or sound issues. However, there are multiple methods to solve it, and we will show you four of them in our guide.
Apple allows its users to install Windows 10 if they feel like using the operating system through a utility called Boot Camp. It conveniently lets the users switch between macOS and Windows, which is not available on a Windows PC. Though sometimes, this sudden switch of the operating system could result in specific hardware issues within the Mac, such as the sound problem. However, the Boot Camp no sound problem could be easily solved with the four methods listed below, and we will discuss all of them in our guide.
You may very well have an outdated version of Boot Camp installed on the Mac computer that could be causing the inability of the device to produce sound. It is wise to install the latest version of Boot Camp on the system, and here is the method to do that:
If the sound on your Mac isn’t working, then it may very well be due to the outdated version of your Mac’s audio driver. You can fix the issue by quickly installing the latest version of the audio driver by following the instructions stated below:
Realtek is a convenient sound enabling company that helps in providing drivers for your Mac and Windows. The recent switch to the Windows OS on the Mac could disrupt the performance of the driver, and you would have to download and install the latest Realtek Driver on your Mac. Here is the method:
There is a chance that the drivers of Boot Camp may be faulty. Despite, all of that, you could quickly fix the drivers by following the steps below:
It doesn’t matter if you are using Windows OS on a conventional PC or the Mac computer, if your data has been accidentally erased, then it can be recovered with Recoverit Data Recovery software.
The application can work around more than 1000+ different kinds of files and formats and recover them. It also reads data from every type of file support format, including NTFS, FAT, HFS+, and APFS. By following three quick steps, you will be back to using lost data on your system within a few minutes.
Step 1. Select a location:
Run Recoverit on your Mac computer with whatever operating system(macOS/Windows) you are using. Select the preferred folder or disk and hit “Start.”
Step 2. Scan the location:
The scan will not take long, but if you feel the urge to the recovered data beforehand, Recoverit offers the Pause and Stop button to halt the scanning process so that you can check your files. The interface will notify you of the successful scan with a pop-up message.
Step 3. Preview and recover files:
The retrieved data will be laid out under the following categories:
From there, you will be able to select the files both individually and collectively before hitting the “Recover” button to store them anywhere you like permanently!
Much like humans, machines can take a while to adjust to new surroundings. The same is the case with the audio drivers of the Mac when you switch the OS from macOS to Windows. However, as we learned in the article, no issue is too big, and one could solve the problem with any of the four methods we have discussed in this guide. Data loss can also occur under such circumstances, but you can recover every last bit with the Recoverit data recovery tool.
Feel free to share this guide amongst family and peers, especially if they are looking to use Windows on their Mac computer.