Repair Service | How to Repair Ipod Classic Hard Drive?[2021]

Repair Service | How to Repair Ipod Classic Hard Drive?

Devices are a lot of fun, but sometimes they break. After you’ve invested all that money in a new gadget, you don’t want it to go to waste. If you have an iPod, you can use an ipod classic hard drive repair service. It’ll quickly get your hard drive working again.

Wondershare Recoverit Authors

Sep 14, 2021 • Filed to: Answer Hard Drive Problems • Proven solutions

0

Do you have an old iPod classic? If you do, you'll know how easily they can get corrupted. There are so many different ways your data can become corrupted. The most common way this happens is by dropping it or by unplugging it without ejecting first. We know it can be tempting to miss out on that step when you're in a hurry.

Corruption errors can have all kinds of negative effects on your device. Your iPod might start freezing. It might be unable to copy music back and forth. That's pretty much the use of an iPod, too! Let's say you've dropped your device and it starts freezing. What do you do? One of the easiest ways to repair it is with an iPod classic hard drive repair service.

That's why it's useful to learn how to correctly repair one of these devices to turn it back to its former glory. If you follow our guide; we'll help you with iPod classic 120GB hard drive repair and iPod classic 160GB hard drive repair.

What Are the Problems with Your iPod Hard Drive?

As you know from our introduction, iPod hard drives can have many problems, which may cause audio or video corruption. It's good to know the specific problems you may face. If you read our guide below, you'll have a good idea. Once that's sorted, you can learn how to fix your iPod.

1. Corrupted Software

If your iPod displays the text 'Use iTunes to restore', it means your software is corrupted. Apple gives you instructions to fix the problem. It will cause data loss, though. Although, this could also be caused by a hard drive failure. If all else fails, you need to replace your hard drive.

2. Click Wheel Connection

This is another issue that could be caused by a bad hard drive. When this happens, no information is being sent to the iPod from the hard drive. It won't work correctly. You'll need to replace the hard drive in this situation.

3. The Sad iPod Image

Is your iPod not switching on? Does it just display the image of a sad iPod? This again could be a hard drive issue. Try to do a system restore first. You know it's a hard drive problem if that doesn't work. It's caused by the hard drive being bad or poorly connected.

4. Folder Icon on Start-Up Screen

This is a clear sign of hard drive failure. You can listen to the hard drive to find out if it's working. If there's a smooth sound it's working. If the sound is clicking and grinding the drive is failing. This is a sign you should replace your hard drive.

Now you know some of the possible ways a hard drive can fail, it's time to learn how to fix these problems. You also probably want to know the iPod classic hard drive repair cost.


How to Repair iPod Classic Hard Drive?

We're going to guide you through the process of fixing your hard drive depending on what problem you're facing. Some of the faults we'll look at the hard drive data loss, data corruption, and a bad hard drive.

1 iPod Hard Drive Data Loss

When an iPod hard drive breaks, data can get lost. You're going to want to recover it if it has all your treasured memories on there. The easiest way to recover data, when this happens, is by using an iPod hard drive repair service. You're going to want one that's specifically aimed at data recovery.

Wondershare Recoverit is a great service to use. With a simple download, you can recover lost songs, photos, and videos. That music recovery will come in handy for an iPod classic!

ipod classic repair

How to use Wondershare Recoverit

Follow this simple three-step guide to recover your data.

Step 1: Select Storage

Download and install Recoverit to your Mac or Windows computer. Then connect the iPod hard drive to the system and select storage of lost data. You'll choose the connected iPod hard drive this time.

choose the ipod classic hard drive

Step 2: Scan Location of Lost Data

This time, Wondershare Recoverit will do an all-round scan on your to search out all data on the iPod hard drive. This takes only a few minutes!

scan the ipod classic hard drive

Step 3: Recover Lost Files

After the scanning process is finalized, your lost data will be shown on your screen. All you've got to do is click on recover to get back access to your essential files.

recover audios and videos from ipod

It's a simple and easy process. Head over the Wondershare to recover your iPod disk now!

2 iPod Hard Drive Corruption

Now your data is restored, you need to be able to repair the hard drive. This is one of the causes listed above. So, if you see the 'Use iTunes to Restore' screen, you know what to do. These are the errors that can cause your iPod to freeze and stop music from copying.

This is something you can fix yourself. No need for a service. If you follow our step-by-step guide, it will get the job done.

Step 1: Reset the iPod

When your device isn't connected to the computer, move the switch to ON and OFF and few times.

Hold the menu button and the click wheel down for a few seconds. The Apple logo should appear on the screen. Once you see it, press and hold the middle button and play/pause. The issue may be solved. If it isn't, move to the next step.

Step 2: Check for File System Errors

There's an in-built tool on Windows to do this. You need to close iTunes and run CopyTrans or CopyTrans Manager. Connect the iPod when this is done.

Go to the computer section with Windows Explorer. Find your iPod and click on 'Properties'. Under the 'Tools' tab, find the 'Check now' button. Tick 'Automatically fix file system errors', and start. Any errors will then be found.

check for file system error

Step 3: Check for Physical Damage

Complete all the previous steps, this time make sure 'Scan for and attempt recovery of bad sectors', too. This can take a long time to complete. But, it will fix any errors.

3 Bad iPod Hard Drive

You saw this above when we mentioned the sad iPod image. If you see that, it could mean you have a bad iPod Hard Drive. You should diagnose the problem to see if there is disk failure. If there is, you need to replace the hard drive.

Follow our guide to find out how to replace your hard drive. This is a long process, and it's very difficult.

Step 1: Getting Started

If you follow this process, you run the risk of damaging your device. They are very difficult to take apart. You can get some plastic tools to help you with this. Put the hold switch in the lock position before you get started.

get your ipod started

Step 2: Open the iPod

This may take a few attempts. You need to insert the plastic opening tool in the seam between the front and back. You then need to insert an extra tool, 1.5 inches apart.

Insert a putty knife at an angle, between the two opening tools. Pivot the knife so it's vertical and wiggles it down the gap.

You should push with your middle fingers on the rear panel. Flex it to disengage the metal tabs. Remove it and do the same at the corner.

Insert your plastic opening tool near the headphone jack. Then, insert a metal spudger into the gap you created. You need to disengage the clip.

Insert it again into the other top corner. You need to insert another one into the other, connecting, side. Remove the one from the top and insert it into the side, 1.5 inches away from the other. You should repeat the same process with the putty knife.

Put your metal spudger into the area near the metal clip. You need to wiggle it down so it's fully in the rear panel. Now you should be able to disengage the metal clip. Push up the front panel until the clip releases. Hold the two panels; one in each hand. Gently start to pull the two sections apart.

Step 3: Change the Hard Drive

Slide up the orange connector ribbon using the spudger. Place the rear panel next to the front so the device is lying flat on the table.

change the ipod classic hard drive

You should now lift the hard drive. You need to flip up the plastic tab, keeping the headphone jack ribbon in place. When it's free, slide it out of the connector. Make sure all the metal clips are pointed downwards. Put the rear container on its side and press down. Rotate the hard drive out of the framework.

Place it so it's facing up. Flip-up the small back locking tab. Slide the orange hard drive ribbon out of its connector. You should transfer any items that did not come with the new drive, from your old one. Snap the device shut and test it!

If the above instructions are difficult to understand, you can also play the following video on how to fix your iPod Classic. But need to mention, the manual repair process is quite skillful. If you are not experienced enough, it is advised that you turn to a local technician for help.

Recent Videos from Youtube

View More >

Conclusion

We hope you've found all the information you need and now know how to repair the iPod hard drive. Remember, you can do it yourself or use some ipod hard drive repair software. First work out what the problem is using our guide. Once you've learnt this, you can begin to fix the problem. Don't lose your data! Remember to recover any lost data using Wondershare Recoverit. There we go! You can now enjoy your iPod classic for years to come. Some things just don't go out of style.

Other popular Articles From Wondershare

Recoverit author

Theo Lucia

chief Editor

(Click to rate this post)

Generally rated4.5(105participated)

0 Comment(s)
Home > Resources > Answer Hard Drive Problems > Repair Service | How to Repair Ipod Classic Hard Drive?
ubackit 2.0