Attempted to Write to Read-Only Memory Issue

Recoverit Editorial Team

Oct 22, 2026 • Filed to: Windows Computer Solutions • Proven solutions

TL;DR:

The "Attempted to Write to Read-Only Memory" (0x000000BE) Blue Screen of Death on Windows 7, 8, and 10 is primarily caused by incompatible device drivers attempting to write to protected memory segments, which is best resolved by updating faulty drivers via Device Manager or uninstalling recently added software.
    ● Access Safe Mode to safely isolate software conflicts, which requires pressing F8 during restart on Windows 7 or navigating through Advanced Options to Startup Settings on Windows 10.
    ● Run the Windows Memory Diagnostic tool by executing mdsched.exe in the Run dialog to automatically analyze and detect physical RAM shortages triggering the stop code.
    ● Windows 10 users can leverage the built-in Blue Screen Troubleshooter while in Safe Mode by navigating to Settings, Update & Security, and then Troubleshoot to diagnose the firmware or OS trigger.

---

Ask AI for a summary

ChatGPT Perplexity Gemini Claude Grok Free Download Free Download Free Download

There are surplus reasons that would take you up to the error message "Attempted to Write to Read-Only Memory Issue" with the code "0x000000BE." Need to find out what problems can this blue screen death error can result in? Else if you are wondering how to solve the "Attempted to Write to Read-Only Memory Issue," you have come to the right place. Here is an article piled up with details to resolve the "Attempted to Write to Read-Only Memory Issue."           

Part 1: Overview of the Attempted to Write to Read-Only Memory Issue

1. What is the “Attempted to Write to Read-Only Memory” issue?

When working with an HDD, you get redirected to the stop error code "Attempted to Write to Read-Only Memory" at times. It is a BSOD (Blue Screen of Death) error that usually occurs on Windows 7/8/10. When the device driver attempts to write to a read-only memory segment, you end up with this error "Attempted Write to Read-Only Memory" with the code 0x000000BE like the below interface.

2. What causes the “Attempted to Write to Read-Only Memory” error?

The “Attempted to Write to Read-Only Memory” error can arise due to the following reasons:

• Device driver issues: One of the primary reasons or causes of the attempted write-to-read-only memory error is the presence of device driver complications. The three primary device driver-oriented problems are:

1. The new device drives incompatibility.
2. Outmoded PC hardware.
3. Faulty/corrupted drives.

• Operating system services: If you have a non-updated operating system or any corrupted operating system problems on your Windows, you can get the 0x000000BE error.

• Firmware or Malware: If you have recently installed any firmware with blue screen problems, it is another probable reason to get a read-only memory error. Alongside, if the Windows file system comes under any malware or vicious virus attack, you can end up with the error message.  

Part 2: Solutions to fix the Attempted to Write to Read-Only Memory Issue

So, how to solve the "Attempted to Write to Read-Only Memory" error? If you wonder if it is going to a complex task, then, absolutely, it isn't. We have listed some possible solutions to resolve the "Attempted to Write to Read-Only Memory" error efficiently.

Fix 1: Try updating or reinstalling device drivers

The first and foremost way to solve the "Attempted to Write to Read-Only Memory" error is by updating the device driver applications.

1. On the search box, enter Device Manager to take you to the device management session.
2. If you haven’t updated the driver, you can right-click on the driver and press on the Update driver option.
3. To uninstall the device, you can tap the Uninstall option. Don’t worry, as once you reboot the system, necessary firmware will be auto-updated and installed on the PC.

You can also do the automatic update by executing “Start > Devices and printers > Device Installation Settings > Yes, do this automatically > Save Changes.”

Fix 2: Remove or uninstall new apps

Suppose you have recently installed any new apps or software, and as a result, you encounter the "Attempted to Write to Read-Only Memory" error. In that case, you can uninstall the latest software and see if you are getting the BSOD error again. On your Windows 10, you can do it from the settings menu. Whereas on Windows 7, you can use the Control Panel session.

Fix 3: Update the PC or Windows

Write to Read-Only Memory Issue can occur if you don't upgrade the operating system at the right time. So, to remove the error, you can check for the Windows updates. You can find it under the "Update & Security" section of settings in Windows 10 and through "Control Panel > System & Security > Windows Update" on Windows 7.

Fix 4: Enter into safe mode

Another way to fix the "Attempted to Write to Read-Only Memory" error is to enter the safe mode. It is one such advanced boot option that you can do through "PC Restart > F8 > Advanced Boot Options > Safe Mode" in Windows 7. It is quite different in Windows 10, where you can enter safe mode by "Startup Settings" under the "Advanced Options."   

Fix 5: Make a memory analysis

As memory shortage is another reason for the “Attempted to Write to Read-Only Memory” error, making a memory diagnosis is the best choice to go.

1. Open the Run dialog box, type mdsched.exe, and hit the OK button.
2. On the following window, choose the “Restart and check for problems (recommended).”

The memory analysis will analyze your PC, and errors will get detected automatically.

Fix 6: Execute Blue Screen Troubleshooter

Another way to solve the "Attempted to Write to Read-Only Memory" error is to use the Blue Screen Troubleshooter option on Windows 10 on safe mode.

1. Enter safe mode through “Advanced Startup Settings” and restart your PC.
2. Execute “Start > Settings > Update & Security > Troubleshoot > Blue Screen > Run the troubleshooter.”

Part 3: Tips to avoid the Attempted to Write to Read-Only Memory Issue

If you wish to avoid the Attempted Write to Read-Only Memory error, you can try the below-listed tips in the safe zone.

• Look for compatibility: As Driver incompatibility is the primary cause of the “Attempted to Write to Read-Only Memory Issue,” you need to check the compatibility of the driver application before installing them on your computer.
• Check for outdated or corrupted drivers: In some cases, 0x000000BE error code raises as the result of faulty or corrupted device drivers. Hence, in periodic intervals, it is always recommended to check the stored devices carefully one by one.
• Avoid Firmware and malware issues: Blue screen of death issue indicates any recent firmware or malware infection. You need to install a trusted antivirus to stop a vicious virus attack. Check the operating system: If you have recently updated your operating system with the corrupted update, you can end up with this BSOD issue. So, carefully check the Windows file thoroughly before and after the system update.  
• Check the operating system: If you have recently updated your operating system with the corrupted update, you can end up with this BSOD issue. So, carefully check the Windows file thoroughly before and after the system update.
• Make a backup or file copy: Before you are about to troubleshoot the Attempted Write to Read-Only Memory error, make a backup of all the critical or important files so that you are safe from data loss.   

The Bottom Line

Thus, you saw, no issues or error code in Windows is unsolvable. Similarly, the "Attempted to Write to Read-Only Memory" Issue isn't a big issue to get rid of with the above overview on the subject, its related solutions, and so on by now. Lastly, if one method or fix doesn't put a full stop to the 0x000000BE error code, don't hesitate to try the other mentioned solutions as well! 

People Also Ask

1. What results in the Attempted Write to Read-Only Memoryissue?

Any device driver installed on your Windows OS that triggers an incompatibility mode of action can result in the Attempted Write to Read-Only Memory error message. Other causes could be a rollback, accidental uninstall of drivers and power outrages.

2. What does the Attempted Write to Read-Only Memoryissue imply?

Attempted to Write to Read-Only Memory (0x000000BE) error flashes on your Windows when a driver tries to do a write operation on the read-only segment on your PC's memory. If you can identify the Driver segment due to which the error occurred, the Driver will display next to the STOP message on the screen.

3. How to fix attempted write-only memory?

To fix the Attempted Write to Read-Only Memory error, you can uninstall recent software, run memory diagnostics, update windows, update BIOS, and try to run some blue screen troubleshooter applications too.

4. Windows stop code memory management: What is it?

This error, related to BSOD, is a critical issue due to graphical card issues, new hardware, and faulty RAM.