Windows stop code faulty hardware corrupted page error is very annoying as it is the main cause for our most important work getting affected. Many reasons are responsible for this error to occur.
In this article, we are going to find the causes for faulty hardware corrupted page and different solutions to resolve this issue. Additionally, we are going to know about the Recoverit data recovery tool to get the damaged or corrupted data back into your computer.
To better understand the faulty hardware corrupted page error, it is very important to know the causes behind the error. We have listed below some of the reasons behind this error:
The computer's fast startup option can be a reason for the error, so the only option left for you is to disable the fast startup option on your computer. This can be done by following the below steps:
Step 1: In your computer, open "Control Panel" by typing in the search bar.
Step 2: Go to "Control Panel Options" > "All Control panel Items" > "Power Options".
Step 3: In the left pane, click "Choose What the Power Button Does".
Step 4: Click on "Change settings that are currently unavailable" which will allow you to change the shutdown settings.
Step 5: Uncheck the "Turn On Fast Startup" option. Click on "Save Changes".
Step 6: Restart your computer and check whether the error is fixed or not
Corrupted system files or damaged hardware memory might also be the reason behind the faulty hardware corrupted page. To resolve such error, you can try running Windows Memory Diagnostic and System File Checker. Thus can be done by following the below two methods:
Run a RAM check:
Step 1: Open Run dialog by pressing "Windows + R" and type "mdsched.exe".
Step 2: In the Windows Memory Diagnostic window, click "Restart now and check for problems (recommended)".
Step 3: It will scan and repair the hardware memory problems which might take 20 minutes.
Run System File Checker
Step 1: Press "Windows + X" and from the menu, select Command Prompt (Admin).
Step 2: In the command prompt, type "sfc /scannow" and press "enter".
Step 3: Then the system will start scanning and once that is done restart your computer and check if the error is resolved.
While installing the Intel Management Engine Interface (IMEI) if there is an error that caused the faulty hardware corrupted page, it can be resolved by updating Intel Management Engine Interface.
Step 1: Visit the official website of the Intel Management Engine Consumer Driver for Intel NUC.
Step 2: Hit the blue button to download and install it. Restart the PC and check if the problem occurs.
Outdated drivers can be the key reasons for the faulty hardware corrupted page error. So it is very important to update all your drivers (especially display drivers) as it will allow you to fix the errors and ensure the smooth running of your computer.
This can be done following the below steps:
Step 1: Open Run dialog box and type "devmgmt.msc". Press Enter key to open "Device manager".
Step 2: Search for Display Adapters and right-click on the one you wish to update.
Step 3: Head to "Update Driver Software".
Step 4: Click on "Search automatically for updated driver software". The PC will begin to search for the device driver's updated version. You will then be able to update it easily.
Now, restart your PC and see if everything is alright now.
If none of the above mentioned have worked, there is only one option left which is resetting your operating system. But before performing this, ensure that all your important data and files are stored as a back-up. Follow the below steps:
Step 1: Open "Settings" and select "Update and Security".
Step 2: Select "Recovery" in the left panel.
Step 3: Under the "Reset this PC section", click "Get Started" followed by "Remove Everything".
Step 4: In "Ready to Reset this PC", click the "Reset" button.
Step 5: Once reset is done, windows will be installed automatically.
As mentioned in the above solutions, while resetting the OS some of your important files may be lost. In such cases, we can use the Recoverit Data Recovery tool to recover the lost data on your computer. This tool has built-in functionalities that help you to recover your data in easy steps.
Step 1: Select Location
Launch the program and select the location on your computer from where you want to recover your data. Select a hard drive from the "Hard disk drive" or any other location on your computer. Click "Start".
Step 2: Scan Selected Location
Recoverit enables auto scan of the selected location which may differ from minutes to hours based on the size of the files available in the location.
This tool gives two user-friendly options:
Step 3: Preview Files
Recoverit Data Recovery tool has a wonderful option of Preview. This option allows you to view the file before recovering it.
Once you find the preview of files, you can view the file on full screen, zoom in, and zoom out the files.
If the preview of the file matches with the one you are searching, click on the "Recover" button available under the preview to get that file back to your computer.
Ensure to save the recovered file into any external storage device.
Follow the below-mentioned solutions to resolve the stop code faulty hardware corrupted page error which will be annoying for many of us. These simple solutions will resolve the error and ensure that your computer is back on business.
In a couple of solutions, there is a chance that your data may be lost. To recover your data, use third party tool "Recoverit Data Recovery" to ensure that your important data is recovered and stored in a user friendly and easy way.